Finding Songs
How to Choose and Cut a 16-Bar Audition Song
By the Starchild Music team · November 19, 2026 · 6 min read

The short answer
A 16-bar cut is 16 measures of a song, usually well under a minute, chosen so it can be played by the accompanist, sung by you, and still tells a small story with a start and a finish. Pick the 16 bars that show your voice best, not just the first 16, and keep a longer cut and the whole song ready.
A 16-bar cut is a short excerpt of a song, 16 measures long, that you sing when an audition gives you very little time. At a typical pace that is well under a minute, though it depends on the song's tempo. The best cut is not always the first 16 bars. It is the 16 that fit your voice, can be played by the accompanist and make a small, complete moment with a beginning and an end.
Auditions for school shows, community theater, choirs and talent shows all run on short windows. This guide covers choosing the song, choosing the cut and marking it so the pianist can follow. Casting teams differ, so always follow the instructions in the audition notice.
What bars and time mean
A bar, also called a measure, is one repeating group of beats. A 16-bar cut means 16 of them, counted from where you start. Guidance on time varies, and we found no single standard. Ensemble Schools notes some professional auditions ask for as few as 8 bars, and that for a timed cut of one minute you should pick your strongest minute, ideally mixing verse, chorus and bridge.
The same guide says a cut of 30 or 34 bars, if it keeps the ending from being awkward, is nothing to worry about. Still, ask if the panel wants bars or seconds, and if you are unsure, prepare for both.
Choosing the song
- Match the show. Pioneer Drama's audition guide advises against a song from a show whose style is far from the production you are trying out for.
- Match the role. Consider the character type and age, because a character role calls for different material than a romantic lead.
- Pick a song that works when trimmed. The same guide notes you "might only be able to sing 16 bars of a prepared song," so your strongest material should come early, and auditioners may ask for the full song, so learn the whole thing.
- Choose a key you can sing well. Ensemble Schools says to stay with the original key for musical theater, while pop auditions allow more flexibility, so pick a key that is impressive but manageable.
- Check the words. Make sure the story in those lines stands alone, without the verses you cut.
Three ways to cut
Andrea Wilhelm, writing for New Musical Theatre, says a 16-bar cut must be playable by the accompanist, singable by you and make a coherent dramatic statement with a musical arc. She compares three approaches:
- An audition songbook cut: pre-selected cuts that accompanists know well, but many singers use them, so you may not stand out.
- The last 16 bars: usually the song's most demanding moment, but you miss the build-up to the drama.
- The beginning and the ending joined: keeps the arc and sets the mood, but needs careful work with the accompanist on awkward jumps.
Her main point is that no cut is perfect. Ensemble Schools adds a rule of thumb: "It's much smarter to count out your most impressive and versatile bars," which often means skipping a repeated verse and moving straight to a chorus or bridge. Start and end wherever shows you off best.
Marking the cut for the accompanist
- Use a clean copy. Mark the start and the end bar clearly, with a bold line and the bar number.
- Mark any jump, such as a skip from bar 8 to bar 40, with a visible arrow and a written note.
- Add a note on your tempo, and set your breath places in pencil.
- Leave a lead-in. Ensemble Schools advises leaving "room for some sort of intro so that you can easily know when to come in."
- If you use a backing track, cut it to match your bars, and bring it on a device that is charged, with a backup.
A worked example
Here is an invented one. You are auditioning for a winter community musical on December 5. You choose a ballad of 48 bars with a verse, a chorus, a second verse and a bridge that climbs to a high note.
- Option 1: the first 16 bars. This is a gentle verse and only half a chorus, so it shows a pleasant sound but not your range.
- Option 2: the last 16 bars. This is the bridge and the final chorus. It shows range but starts at the hardest point, with no warm-up.
- Option 3: the last four bars of the first chorus, then the bridge. It has a small arc, from calm to the high note. You check with the pianist that the jump is easy to follow.
- Choose option 3 if the jump is clean. Prepare option 2 as your plan B. Learn the whole ballad.
Finding a song that fits your voice
Everyone auditions with a song a lot of other people choose. If you want something fresher, an original can work, as long as the panel allows it. Check first, and check that the piece has a clear 16-bar moment. On Starchild you can hear every song in different styles and voices before you license it, change the key live, and lower the demo vocal to sing over it. A license covers performing the song live. Browse songs for artists to record. Our guides to songs for talent shows and auditions and choosing a song for your voice type cover the choosing side.
Do this today
- Read the audition notice again for bars, seconds, key and accompaniment rules.
- Pick two songs. For each, mark a 16-bar cut and a longer cut.
- Time each cut at your real tempo.
- Sing each cut three times in a row, then once from a random start.
- Mark the music for the accompanist and have a copy in a folder.
- Learn the whole song, in case you are asked for more.
Sources
Find a song to license
Every song on Starchild can be heard in different styles and in your key before you license it.